Inforce Computing Forums • View topic - How to read/write to GPIOs from Android?

How to read/write to GPIOs from Android?

2 posts • Page 1 of 1

How to read/write to GPIOs from Android?

by pedro.villanuevapena » Fri Jan 12, 2018 9:18 am

Hi,

Is there a way in android to control the GPIOs, and the PWM GPIO in particular?

Thanks

pedro.villanuevapena: Posts: 5; Joined: Fri Nov 10, 2017 7:24 am

Re: How to read/write to GPIOs from Android?

by ashwin » Thu Jan 18, 2018 2:13 am

You can refer to APQ8096_Configure_BLSP_Port_Application_Note_002977_Rev available on techweb.

Best Regards,
Ashwin

ashwin: Posts: 44; Joined: Wed Jul 01, 2015 10:07 pm

2 posts • Page 1 of 1

Return to INFORCE 6640™ Micro SBC

Jump to:

Contact Us.

View new posts

Re: Flashing the 6640 SBC by jhlim
Re: Linux V1.0 boot failure by tamo2
Re: Is the Watchdog Timer Available to use? by kim760407
I want to enable i2c, how do I build it. by harmofil
Re: Wired network conneciton by ashwin
Wired network conneciton by ianwalberg

Re: Linux V1.0 boot failure by ashwin
Re: Is the Watchdog Timer Available to use? by ashwin