Configuring LVDS driver for WUXGA 1920 * 1200 on IFC6410

[Inforce]

Hi Guys
I’m trying to configure LVDS Dual Mode driver to run at resolution 1920*1200 with below parameter list.
When I load my engg build with 1920*1200 resolution, ADB stops working. ADB device does not
Show up in device Manager after system reboot.
It seems that board is very sensitive to resolution params. Any help will be appreciated.
I have same params working with 1920 * 1080 resolution.
Wait for reply

Regards
-Rajan Gupta