Inforce Computing Forums

inforce computing forums to discuss about inforce products

Not show eth0, wlan0 after flashing debian 17.09

Questions and discussions related to Inforce 6309™ Micro SBC

by ductranc » Thu Mar 15, 2018 8:40 pm

I compiled the debian 17.09, modified your pre-build rootfs and flashed images to my IFC6309X-01-P2 , Debian works well but it could not detect network interfaces (both eth0 and wlan0, it seems bluetooth also doen't work).

"sudo ifconfig" only shows l0
"ls /sys/class/net/" only shows l0

What should I do to solve this issue?
(I spent two days googling but I have not solved this issue)

Here is location of kernel: ... ian/17.09/
And pre-build rootfs that I modified:
Posts: 2
Joined: Wed Mar 14, 2018 11:50 pm

by Sundeep » Wed Mar 21, 2018 1:01 am

Hi Ductranc,
Have you used the proprietary firmware from ... And the WCN3620 driver from ... rs/wcn36xx?

Posts: 46
Joined: Wed Jul 01, 2015 9:10 pm

by ductranc » Wed Mar 21, 2018 7:13 pm

Hi Sundeep,

Thanks for your support. I could solve this issue.
Posts: 2
Joined: Wed Mar 14, 2018 11:50 pm

Return to Inforce 6309™ Micro SBC


Contact Us.